PRAESENSA About | en 117
Bosch Security Systems B.V. Configuration manual 2020-09 | V1.20 | PRAESENSA 1.20
9 About
Below the About page, licenses can be download. It is not required to have PRAESENSA
administrator or installer logon user account rights to view and/or download items in the
About section.
To do so:
Click About to make available the following menu item:
About (menu item)
1
Open source licenses, page 117
Is used to view and download the PRAESENSA open
source licenses.
9.1 Open source licenses
An up to date listing of open source licensed software which may accompany a PRAESENSA
device is stored inside the device and can be downloaded as a zip‑file. Download instructions
are in the Quick Installation Guide (QIG) of the device. This list is also available from
www.boschsecurity.com/xc/en/oss/.
The license texts are also installed when installing the firmware in the location where the
firmware files are installed. Windows10: (“c:\ProgramData\Bosch\OMNEO\Firmware\xxx”
with xxx the PRAESENSA software release).
From the configuration page only the licenses of the system controller open source software
can be downloaded.
To do so:
1. Below About, click Open source licenses:
2. Click the download button:
– A file screen appears with a .zip file.
3. Open and/or save the .zip file on your computer:
Each of the components listed may be redistributed under the terms of their respective open
source licenses. Notwithstanding any of the terms in the license agreement you may have with
Bosch, the terms of such open source license(s) may be applicable to your use of the listed
software.