12 en | General information PRAESENSA
2020-09 | V1.20 | PRAESENSA 1.20 Configuration manual Bosch Security Systems B.V.
(secure) connection between the system controller and the Open Interface client.
Download the certificate and open/install/save (depending on browser type) the crt‑file.
Activate the certificate on the client PC. See section 7.2 of the PRAESENSA configuration
manual.
– System access to the devices of this system is secured via the OMNEO security user name
and passphrase of the system. The system uses a self-generated user name and long
passphrase. This can be changed in the configuration. The user name must have between
5 and 32 characters and the passphrase must have 8 to 64 characters. To update the
firmware of the devices, the firmware upload tool requires this security user name and
passphrase to get access.
– In case a PC for event logs is used (PRAESENSA logging server and viewer), make sure
that the PC is not accessible by unauthorized persons.
To Next Page
Loading...
