144 en | Event messages PRAESENSA
2020-09 | V1.20 | PRAESENSA 1.20 Configuration manual Bosch Security Systems B.V.
– Which processor was the cause of the reset (CPU, TBD). Not available on Open lnterface
clients.
– Event can only be generated when the device starts up. CPU only available on system
controllers.
Event: Fault input
Group: Fault
Occurrence: Logs the activation of a fault input.
Originator: Control input or Open Interface client that injected the fault.
Resolve:
– When the input is deactivated or when the device disconnects (in case the event
occurred on a device).
– When the Open lnterface client reports the event to be resolved or when the client
disconnects (in case the event occurred on an Open lnterface client).
Recommended action: Check the lines/connections and devices.
Extra information: Description of the error as configured by the user.
Event: Zone line fault
Group: Fault
Occurrence: Logs the activation of a zone line fault input.
Originator: Control input that injected the fault.
Resolve: When the input is deactivated or when the device disconnects (in case the event
occurred on a device).
Recommended action: Check zone lines/connections and devices.
Extra information: Name of the zones.
To Next Page
Loading...
