PRAESENSA Getting started | en 19
Bosch Security Systems B.V. Configuration manual 2020-09 | V1.20 | PRAESENSA 1.20
Update the software
Important is to check the PRAESENSA Installation Package x.xx.zip and Firmware upload tool
Vx.xx for new releases on a regular base. To do so:
1. Go to www.boschsecurity.com > Product Catalog > Choose your region and country:
– Type PRAESENSA in the search text box >
– Select and click the PRAESENSA product page of the System controller >
– Select and click Downloads > Literature on the product page >
– Select the latest available Release notes. Follow the release note guideline on how
to proceed.
2. Select and click the PRAESENSA product page of the System controller >
– Select and click Download > Software on the product page > Check the release
version (x.xx) and date of:
PRAESENSA Installation Package x.xx.zip and other (optional) files, if required.
3. Go to https://licensing.boschsecurity.com/OMNEO/html/load.htm?1000 and check the
Firmware upload tool Vx.xx (where x.xx is the version release number). It includes:
– SetupOMNEOFirmwareUploadToolBundle(64).exe (two versions 32‑bit and 64‑bit).
4. If the online PRAESENSA Installation Package x.xx.zip and/or the Firmware upload tool
Vx.xx release version is of a higher/newer version than the one installed on your
computer; install (overwrite) the newly released version(s).
– To install, see the previous topic: Install the software
To Next Page
Loading...
