76 en | Configure the system PRAESENSA
2020-09 | V1.20 | PRAESENSA 1.20 Configuration manual Bosch Security Systems B.V.
Add a zone
Proceed as follows to create a new zone:
1. Click the Add button and enter a name for the new zone in the Name text field:
– For example: Departure 2
– It may consist of up to 16 characters, maximum.
2. Click the Add button or Cancel button if you want to cancel:
– The new zone is added to the Name selection menu.
3. (Multiple) Select each Audio output (left box area) that must be added to the zone.
4. Double click the selected Audio output or click the > button to add the output to the
zone area (right box area).
5. Repeat the previous steps 1‑4 to add a new zone.
6. Click the +Volume settings category to set the announcement and background music
(BGM) volume:
– See the Volume settings topic in this section.
7. Click the Submit button:
– Note that the changes are not permanent until the configuration is saved. See
Save
configuration, page 102
.
Delete a zone
Proceed as follows to delete a zone:
1. From the Name dropdown list > select the zone that must be deleted.
2. Click the Delete button to delete the zone:
– A pop‑up window asks to confirm this choice (OK / Cancel).
3. To delete the zone, click the OK button to confirm.
– The deleted zone is no longer available in the Name dropdown list. It will also be
removed from all occasions where it is used in the configuration.
4. Click the Submit button:
– Note that the changes are not permanent until the configuration is saved. See
Save
configuration, page 102
.
Rename a zone
Proceed as follows to rename a zone:
1. From the Name dropdown list > select the zone that must be renamed.
2. Click the Rename button to rename that zone.
– A new row appears.
3. Change the name in the text box:
– The name may consist of up to 16 characters, maximum.
– The name of the zone will be changed on all occasions where it is used in the
configuration.
4. Click the Rename button.
5. Click the Submit button:
– Note that the changes are not permanent until the configuration is saved. See
Save
configuration, page 102
.
To Next Page
Loading...
