78 en | Configure the system PRAESENSA
2020-09 | V1.20 | PRAESENSA 1.20 Configuration manual Bosch Security Systems B.V.
Zone grouping configuration page
Below Zone definitions, click Zone grouping:
– A screen appears listed the following items:
1. Select each of the following items:
Item Value Description
Zones Selection Shows the available audio zones (left box
area). Zones can be created in
Zone options,
page 75
Name Selection Shows the name of the zone group
(dropdown list selection). See Add a zone
group topic in this section.
> and < Buttons Using the > and < buttons, selected zones
can be added to, or removed from, zone
groups.
Zone group Selection Shows the zones that have been assigned to
the zone group (right box area). See Add a
zone group topic in this section.
Add Button A new zone group can be added. See Add a
zone group topic in this section.
Rename Button An existing zone group can be renamed.
Automatically this name is replaced
everywhere in the configuration where this
zone group is used. See Rename a zone group
topic in this section.
Delete Button An existing zone group can be deleted from
the system configuration. Automatically this
zone group is deleted everywhere in the
configuration where this zone group is used.
See Delete a zone group topic in this section.
Submit Button Click the Submit button to store the settings:
Notice that you always have to Save the
configuration. See
Save configuration, page
102
Add a zone group
1. Enter a name for the zone group in the Name text box.
2. Click the Add button. The procedure for creating a zone group is similar to the procedure
for Add a zone. See
Zone options, page 75
.
Rename a zone group
The procedure for renaming a zone group is similar to the procedure for Rename a zone. See
Zone options, page 75
.
Delete a zone group
The procedure for deleting a zone group is similar to the procedure for Delete a zone. See
Zone options, page 75
.
To Next Page
Loading...
