Rexroth IndraDrive Identifying and Checking the Delivered Components 4-1
DOK-INDRV*-HMV-*******-PR01-EN-P
4 Identifying and Checking the Delivered
Components
4.1 Delivery of Components
Packaging
The components are supplied in separate packaging units.
The content of the packed components and the order number may be
identified using the adhesive barcode label on the packaging.
See chapter 11 "Disposal and Environmental Protection".
Accompanying Documents
A delivery note in duplicate can be found in an envelope on one of the
packages supplied. No other accompanying documents are provided.
The total number of containers supplied is recorded on the delivery note
or consignment note.
4.2 Scope of Delivery
Overview
as standard optional
touch guard rails for connecting the DC bus
grounding bracket rails for connecting the control voltage
connector X31, X32, X33
safety instructions (brochure; DOK-
GENERAL-DRIVE******-SVSx-MS-P)
Fig. 4-1: Scope of delivery
Checking the Delivered Components
Please immediately check whether the delivered components are:
• complete
• correct
• intact
Packaging Units
Packaging Labels
Disposal of Packaging Material
To Next Page
Loading...
