Rexroth IndraDrive Electrical Installation 7-27
DOK-INDRV*-HMV-*******-PR01-EN-P
X32, Mains Contactor Control, DC Bus Short Circuit, Braking Resistor
Threshold
The X32 interface is used to connect
• the mains contactor control
• the DC bus short circuit
• the switching signal for braking resistor threshold
Note: See chapter 9 onward for further information on mains
contactor control.
hmv_X32
9
8
7
6
5
4
3
2
1
Fig. 7-28: X32
Type Number of poles Type of design
LK09-1M WIN R3,5
series 0734
9 Bushing on device
Fig. 7-29: Design
Cross section
single-wire
[mm²]
Cross section
multiwire
[mm²]
Cross section
in AWG
Gauge No.
0,14 - 1,5 0,14 - 1,5 28 - 16
Fig. 7-30: Connection cross section
Description
Graphic Representation
Design
Connection cross section