Rexroth IndraDrive Electrical Installation 7-21
DOK-INDRV*-HMV-*******-PR01-EN-P
X1, Bus Module
The bus module permits data exchange between the supply unit and the
drive controllers.
X1_hmv
Fig. 7-15: X1
Type Number of
poles
Type of design
Flat line connector 8 Connector on device
Fig. 7-16: Design
Note: If extension leads are used the leads must be shielded. Their
total length must not exceed a maximum of 40 m.
Graphic Representation
Design
To Next Page
Loading...
