1-2 Introduction Rexroth IndraDrive
DOK-INDRV*-HMV-*******-PR01-EN-P
Basic Structure
Supply Unit
hmv_aufbau.fh7
2
1
3
1: Signal processing
2: Control panel (Display)
3: Power connections and control voltage connection
Fig. 1-1: Basic structure
Control Panel
The control panel is a separate part which is plugged on the supply unit.
The supply unit is supplied ex works complete with control panel.
Esc
Enter
01.F4002
Fig. 1-2: Standard control panel with sample display and control elements
• Operating status, command and error diagnoses, and warnings for
problems requiring attention are shown in the display.
• Using the four buttons, the commissioning operator or service
engineer can opt, in addition to master communication using the
commissioning tool or NC control, to display further error diagnoses.
To Next Page
Loading...
