6-2 Mechanical Mounting Rexroth IndraDrive
DOK-INDRV*-HMV-*******-PR01-EN-P
All Rexroth controls and drives are developed and tested according to the
state-of-the-art of technology.
As it is impossible to follow the continuing development of all materials
(e.g. lubricants in machine tools) which may interact with our controls and
drives, it cannot be completely ruled out that any reactions with the
materials used by Bosch Rexroth might occur.
For this reason, before using the respective material a compatibility test
has to be carried out for new lubricants, cleaning agents etc. and our
housings/our housing materials.
Compatibility with foreign
matters
To Next Page
Loading...
