Bosch REXROTH mMS 4.0 - 2.10 Operator operating positions

Training system mMS 4.0 | R901429162/04.16 Bosch Rexroth AG 15/68
Safety instructions
2.10 Operator operating positions
The training system must be placed on a level base as upright as possible,
and the guide rollers must be locked into place. In order to teach and learn
the procedures on the mMS 4.0 training system, the following space is provided
for the mMS 4.0 training system:
Fig. 1: Space requirement (in cm), mMS 4.0 training system
Fig. 2: Space requirement (in cm), mMS 4.0 training system
The following teaching stations are provided depending on how the mMS 4.0
training system is used:
Table 4: Teaching stations for an mMS 4.0 training system
Work step
Number of persons
working on the system
Number of persons
working on the system
per station
Alignment
1-4
1-3
Control points
(per station)
2
1-2
Teaching stations
80
0-80
400
234
80
80
234
240
80
80
80
0-80