Bosch REXROTH mMS 4.0 - 1.4.2 Symbols

6/68 Bosch Rexroth AG Training system mMS 4.0 | R901429162/04.16
About this documentation
The safety instructions are structured as follows:
 Warning sign: Draws attention to the hazard
 Signal word: Indicates the seriousness of the hazard
 Type and source of danger: Designates the type and source of danger
 Consequences: Describes the consequences of non-compliance
 Precaution: Indicates how to avoid the danger
Table 1: Risk classes according to ANSI Z535.6-2006
Warning sign/signal word
Meaning
DANGER
Identifies a dangerous situation that will result in death
or serious injuries if not avoided/prevented.
WARNING
Identifies a dangerous situation that could result in death
or serious injuries if it not avoided/prevented.
CAUTION
Identifies a dangerous situation that could result in minor
to serious injuries if not avoided/prevented.
NOTE
Indicates property damage: The product or the damage
can sustain damage.
1.4.2 Symbols
The following symbols denote suggestions which are not safety-relevant but
improve the comprehensibility of the documentation.
Table 2: Meaning of symbols
Symbol
Meaning
If this information is not observed, the product will not
be able to be used or operated optimally.

Individual, independent action
1.
2.
3.
Numbered instruction:
The numbers indicate that the actions follow each other.
SIGNAL WORD
Type and source of danger
Consequences for non-compliance
 Measures on hazard avoidance