40/68 Bosch Rexroth AG Training system mMS 4.0 | R901429162/04.16
Operating and display elements
7.2.2 HMI small operating panel VCP
The HMI small operating panel VCP 25 R961008358 is an optional, additional
visualization/control possibility and can be ordered separately.
Fig. 18: Control elements in the training systemā small control panel VCP
2 Snap-In attachment system
3 Contact protected 4mm lab
connector 24 V DC, 0 V,
functional earth
For control and monitoring of the workflow in a station from a
touchscreen.
Attachment system for grooved plates with 8 mm grooves, 25 mm grid.
Contact protected 4mm lab connector 24 V DC, 0 V, functional earth.
2. Snap-In attachment system
3. Contact-protected 4mm lab socket
To Next Page
Loading...
