Training system mMS 4.0 | R901429162/04.16 Bosch Rexroth AG 31/68
About this product
5.2.8 Light conductor R115801073
Light conductor with fiber-glass cables, emitter and receiver in one housing. Can
be mounted flexibly onto the conveyor R901371451.
Fig. 7: Light conductor
5.2.9 Machine control panel VAM 40 R115801080
For controlling the training system. With attachment system lockable for grooved
plates. With 30 short-stroke buttons, a authorization key switch, a feed override
dial, a spindle override dial, an On-Off button and 1 EMERGENCY STOP button.
The VAM40 must be connected to ensure the EMERGENCY STOP button
of the entire system is closed.
Fig. 8: Machine control panel VAM40
To Next Page
Loading...
