Bosch REXROTH mMS 4.0 - 1 About this documentation; 1.1 Validity of the documentation; 1.2 Signs and Symbols; 1.3 Required and Supplementary Documentation

Training system mMS 4.0 | R901429162/04.16 Bosch Rexroth AG 5/68
About this documentation
1 About this documentation
1.1 Validity of the documentation
This documentation describes the “mMS 4.0” training system.
For reasons of simplicity, we refer to it as “mMS 4.0” in the following.
This documentation is intended for assemblers, operators, service technicians
and the system end-user.
This documentation contains important information on how to assemble,
transport, commission, operate, use, maintain and disassemble the product safely
and properly and to resolve simple faults independently.
 Read the documentation in full, in particular, the “Safety information” chapter
before you start working with the product.
1.2 The following signs and symbols are used in this manual:
 Activity symbol: The text next to this symbol describe activities which are
to be carried out from top to bottom in the indicated sequence.
1.3 Required and supplementary documentation
In addition to this manual on the (turnkey) mMS 4.0 training system, the following
additional documentation applies:
 All user manuals for the components.
These can be viewed on the enclosed CD.
 Documentation about mMS 4.0 from Bosch Rexroth.
1.4 Layout of documentation
To be able to use this documentation quickly and safely, standard safety
instructions, symbols, terms and abbreviations are used. These are explained
in the following sections to aid understanding.
1.4.1 Safety instructions
This documentation contains safety information prior to the directions whenever
there is a risk of personal injury or damage to equipment. The measures
described to avert danger must be observed.