Training system mMS 4.0 | R901429162/04.16 Bosch Rexroth AG 33/68
About this product
5.2.12 Pinning unit R115701062
Pinning unit for attaching connection pins. Comprising a tower with press function,
pin storage, an ejector and a slide-in cylinder. For attachment onto the conveyor
R901371451. Pins can be loaded easily from the top. Filling level is monitored
by sensors.
Fig. 11: Pinning unit
Replenishing pins
To load the pinning unit with pins, proceed as follows:
Add a sufficient quantity of pins to the plexiglas tubes on the left and right.
Make sure to continue reloading the pins and that sufficient numbers are
present.
Fig. 12: Replenishing pins
To Next Page
Loading...
