Bosch REXROTH mMS 4.0 - 10.8 Description of the buttons

Training system mMS 4.0 | R901429162/04.16 Bosch Rexroth AG 57/68
Description of the operating functions
10.8 Description of the buttons
Table 9: Description of the short-stroke buttons in the machine operating panels
Short-stroke button
Description
Station
START
starts all movements
All stations
STOP
Stops after each logical step
has completed
All stations
RESET
Puts the EMERGENCY STOP
button into effect either for one
station or several stations
All stations
MANUAL
Displays the Manual
operating mode
All stations
AUTO
Displays the Automatic
operating mode
All stations
MDI
Machine Data Interface, CNC
manual data entry, only used
for CNS application
All stations
Only used for station 3.
HOME
Displays the Homing
operating mode
All stations
SINGLE STEP
Displays the Single step
operating mode
All stations
ON OFF
Connects the line to the
drives. Only used for CNC
application
All stations
Only used for station 3.
CONVEYOR
BELT
In manual mode, the
conveyor belt can be moved
right and left
All stations
JOG-
JOG+
JOG RAPID
In CNC mode, the linear axes
can be moved individually
(also quickly; JOG RAPID).
Only used for CNC application
All stations
Only used for station 3.
Separator rack 1
Separator rack 2
Issue per workpiece per rack
Station 1,
workpiece detection
Testing Unit
Extends contour test cylinder
Station 1
workpiece detection
Removing Unit
Extends sampling cylinder
Station 1
workpiece detection
Capacitive Indicator
Indicates that the capacitative
sensor was actuated
Station 1 workpiece
detection
Contour Indicator
Indicates that the contour
sensor has extended
completely, workpiece open
upwards
Station 1
workpiece detection
Inductive Indicator
Indicates that the inductive
sensor was actuated
Station 1,
workpiece detection
Light Indicator
Indicates that the optical
sensor was actuated
Station 1,
workpiece detection