Training system mMS 4.0 | R901429162/04.16 Bosch Rexroth AG 35/68
About this product
5.2.14 Press R115701072
Press with pneumatic or hydraulic stamp for joining 2 work pieces of dimensions
50 x 50 x 25 mm (LxWxH). Cylinder with throttle check valves for pushing
the work piece in and out.
Fig. 14: Press pneumatic/hydraulic
5.2.15 High-stack storage R115701074
High-stack storage for storing/removal of work pieces. Each of the three 3 rows
can be used to store 5 work pieces. 2-axis warehouse robot with servo motors.
Pneumatic rotary module, cylinder, and gripper.
Fig. 15: High rack storages
To Next Page
Loading...
