MY22Z0a - 12_1.0_25.07.2022
221
Inspection and maintenance
Technical inspection, checking safety, test ride
Inspection Tests Maintenance
Accept-
ance
Rejection
Miscellaneous
Pannier rack
before each
ride
Stability Section 7.1.5 … O.K. Loose Firm
Once a month Dirt … Section 7.3.4 O.K. Dirt Cleaning
6 months Servicing … Section 7.4.3 O.K. Untreated Wax
6 months Check fastening
and paint protection
film
Section 8.5.2 … O.K. Loose Tighten screws,
new paint protection
film
Kickstand
Once a month Dirt … Section 7.3.4 O.K. Dirt Cleaning
6 months Servicing … Section 7.4.5 O.K. Untreated Wax
6 months Attachment Section 7.5.19 … O.K. Loose Retighten screws
6 months Stability Section 7.5.19 … O.K. Tips over Change kickstand
height
Bell
before each
ride
Sound Functional
check,
Section 7.1.10
.
… O.K. No ring, too
quiet, missing
New bell as speci-
fied in the parts list
Attachments
(optional)
6 months Attachment Check mount
fastening
… O.K. Loose Retighten screws
Components Frequency Description Criteria
Measures if
rejected
Components Description Criteria Measures if rejected
Assembly/inspection Tests Acceptance Rejection
Brake system
6 months Functional check O.K. No full braking; braking
distance too long
Locate defective part in brake
system and correct
Gear shift under
operating load
6 months Functional check O.K. Problems when shifting
gear
Readjust gear shift
Suspension
components (fork,
shock absorber,
seat post)
6 months Functional check O.K. Suspension too deep or
no longer exists
Locate defective component
and correct
Electric drive
system
6 months Functional check O.K. Loose connection,
problems when riding,
accelerate
Locate faulty component in
electric drive system and
remedy
Lighting system
6 months Functional check O.K. No continuous light, not
bright enough
Locate defective part in
lighting system and correct
Test ride
6 months Functional check No strange
noises
Strange noises Locate source of noise and
correct
To Next Page
