B+B SmartWorx Airborne M2M ABDN-er-DP55 Series - Pin out and Connectors; Serial Ports; Figure 4 - Abdx-ER;SE-In5 Xxx Block Diagram; Figure 5 - DE-9 (DB-9) Connector Pin-Out

AirborneM2M™ User Guide
13
Figure 4 - ABDN-er/se-IN5xxx Block Diagram
PIN OUT AND CONNECTORS
Pin definition is dependent on the device type selected. The following defines the pin outs for the individual
interfaces.
SERIAL PORTS
The AirborneM2M™ units support either a single or dual serial port configuration. The port pin out can
change depending on the interface configuration chosen. Table 1 shows the pin out for the interface
selected.
Figure 5 - DE-9 (DB-9) Connector Pin-out