AirborneM2M™ User Guide
36
14
When configured correctly the LED pattern should match the following:
ABDN-ER-DP5%x
POWER: Green
LINK : Green
COMM: Red
ABDN-ER-IN5xxx No TCP Connection TCP Connection
COMM: Off Green
LINK : Green Green
POST: Green Green
POWER: Blue Blue
To use the adapter on the wireless network, address all traffic to the IP address of the wireless interface of the ABDx-
ER-DP5xx/IN5xxx. This address is listed in the home page of the web interface.
USING THE WEB INTERFACE
AirborneM2M™ Device Servers and Wireless Adapters include a web interface that provides access to
module status, parameter modification, certificate and configuration file management. To use the web
interface, follow the steps outlined in section 14.0 to establish the IP address of the module. Once the
IP address is known, open a web browser and enter the IP address of the module in the URL window.
The web interface currently supports Internet Explorer v6.0 thru 9.0, Firefox v3.x+, Opera v9.6+,
Chrome v4.0+ and Safari v5.0.5+.
When the authentication request is returned enter:
Figure 8 - Website Login
Username: dpac
Password: dpac
After successfully authenticating with the module, you will be logged into the web server. If this is the
first time you have accessed the device the Express Setup page will be displayed see section 16.0 for
configuration of the device using this page. If you have previously configured the device the default
home page will be displayed (see Figure 9). From here you can update device settings if required. A
quick overview of the web interface follows.
To Next Page
Loading...
Need help?
General