B+B SmartWorx Airborne M2M ABDN-er-DP55 Series - Serial Port Settings

AirborneM2M™ User Guide
86
SERIAL PORT SETTINGS
URL /Configuration/Serial Port Settings
Description Configures serial port settings on the primary serial port.
Field CLI Command
Serial CLI Default Mode
serial-default, serial-default-p1
Serial Port Bit Rate
bit-rate, parity-p1
Parity
parity, parity-p1
Data Bits
data-bits, data-bits-p1
Stop Bits
stop-bit, stop-bit-p1
Flow Control
flow, flow-p1
Input Buffer Flush Size
input-size, input-size-p1
Serial Escape Mode
esc-mode-serial, esc-mode-serial-p1
Network CLI Escape Mode
esc-mode-lan, esc-mode-lan-p1
Escape String
esc-str, esc-str-p1
Serial Interface Type
intf-type