AirborneM2M™ User Guide
35
10
Now launch the Web Browser and configure the device. Right-click the device and then:
1. Select Connectivity Tools
2. Select Launch Web Browser for OEM-Cfg1
Username= “dpac”
Password = “dpac”
11
Opening web page shows adapter status.
Links to the available configuration options are identified in the left hand menu.
The top menu bar provides access to different operations that can be performed by the AirborneM2M™ device.
See section 15.0 for a full description of how to use the web interface.
12
Using Express Setup:
If this is the first time you have configured the device, the Express Setup page will be displayed, please refer to section
16.0 to continue set-up of the device.
If this is not the first time, proceed to section to update configuration.
When the Reboot button is pressed, the unit will restart and install new settings. This may take 15-20 seconds. Please
refresh the web interface after the boot cycle has completed.
To Next Page
Loading...