Brady BradyPrinter i3300 - Installing Firmware Upgrades

BradyPrinter i3300 26
Using System Tools
Installing Firmware Upgrades
Installing Firmware Upgrades
To upgrade firmware:
1. On a computer, go to www.bradyid.com.
2. Point to Help and then, under the Downloads heading, click Firmware.
3. Find the most recent BradyPrinter i3300 firmware upgrade in the list and click it. You can sort
the list alphabetically to make it easier to find the printer model.
4. Click Begin Download.
5. Save the downloaded file to a USB flash drive.
6. Connect the USB flash drive to any available USB port on the printer. The printer recognizes
the upgrade file and displays a message on the touch screen.
7. Follow the instructions on the touch screen. When the upgrade is complete, the printer
restarts.
CAUTION! Do not interrupt printer power during an upgrade.