BradyPrinter i3300 2
Introduction
Compatible Applications
Compatible Applications
The BradyPrinter i3300 is compatible with Brady
®
Workstation desktop software.
When used with Brady Workstation software, the printer will automatically recognize all enabled and
compatible materials up to 4 in. (101.6 mm) wide. For operation of the printer with other software, refer
to the documentation for your application.
Note: Only
BradyPrinter i3300
supplies will work with this printer.
System Specifications
• Weight: 11.5 lbs (5.2 kg)
• Dimensions (stored): 9 in. x 12.0 in. x 9.5 in. (22.9 cm x 30.5 cm x 24.1 cm)
• Operating Temperature: 50 - 104°F (10-40°C)
• Relative Humidity: 10% to 80% RH non-condensing
• Storage: -4 to 122°F (-20 to 50°C) at 15% to 90% RH non-condensing
• Voltage: 100-240 VAC 50/60 Hz, 2A
• Print Resolution: 11.8 dot/mm, 300 dpi
• Output label size: 0.25 in. to 4 in. (6.4 mm to 101.6 mm)
• Maximum label length (continuous): 60 in. (1.5 m)
Button Actions
There are three physical buttons on the front of the printer. Their function is described below.
• The power button turns the printer on/off and is also used for sleep mode (see page 6).
• The feed button advances the label. See page 23 for more information.
• The cut button allows you to manually cut the label.
To Next Page
Loading...
