BradyPrinter i3300 1
1 Introduction
Thank you for purchasing the BradyPrinter i3300, which you can use to create and print professional-
looking industrial labels and signs. All you have to do is:
• Drop in a ribbon cartridge. You can choose from a wide range of single-color ribbons.
• Drop in a label cartridge. You can choose widths that range from 0.25 in. to
4 in. (6.4 mm to 101.6 mm), and come in many colors, styles, and materials.
• Send labels for printing from your labeling software.
Labels and ribbons from Brady Corporation are programmed with the ability to communicate with the
printer and software. This allows you to gain the full benefit of the system.
Features and Functions
The following are just some of the features that make this system so easy to use and ready to meet
your label-making requirements:
• Small, lightweight (approximately 11.5 lbs [5.2 kg]) unit, ready for your desktop.
• Color touch screen LCD display input.
• Single-color job printing at 300 DPI, up to 4 in. (101.6 mm) wide and up to
60 in. (1.5 m) long.
• Wide variety of ribbon colors.
• Easy loading label and ribbon supplies.
• Continuous and die-cut label supplies in a variety of high-performance materials.
• Transfer graphics from PC or USB flash drive. Supported graphic formats are Windows metafile
(*.wmf), Bitmap (*.bmp), JPG file (*.jpg), Graphic Interchange Format (*.gif) and Portable
Network Graphics (*.png).
• Print labels from PC.
• Automatic cutter.
BradyPrinter i3300 supports ZPL, jScript, DPL and BPL. For the list of supported commands, please
visit www.BradyID.com/i3300.
To Next Page
Loading...
