BradyPrinter i3300 30
Maintenance
Cleaning the Printer
Cleaning the Cutter Blade
Note: When cleaning the cutter, you should also clean the supply and cutter sensors.
Materials Required
• BradyPrinter i3300 Cleaning Kit (Cat # B31-CCT)
• Isopropyl Alcohol
• Cutter Cleaning Tool (included in cleaning kit)
1. Remove power and supplies from the printer (see Pre-maintenance Operations” on page 27).
2. Squeeze the two yellow cutter tabs [7] to release the cutter. The cutter mechanism and exit
chute [8] will slide down behind the print head door.
3. Fill the plastic bottle from the cleaning kit with isopropyl alcohol.
To Next Page
Loading...
