Brookeld Engineering Labs., Inc. Page 10 Manual No. M/03-165-D0410
In case of emergency, turn off the instrument and then disconnect the electrical
cord from the wall outlet.
The user should ensure that the substances placed under test do not release
poisonous, toxic or ammable gases at the temperatures which they are subjected
to during the testing.
I.6 Key Functions
Figure I-1 shows the control keys on the face of the DV-II+Pro Viscometer. The
following describes the function of each key.
£
UP ARROW
This key is used to scroll UP (in an increasing
value direction) through the available speed,
spindle and Option menu tables.
§
DOWN ARROW
This key is used to scroll DOWN (in a
decreasing value direction) through the
available speed, spindle and option menu
tables.
MOTOR
ON/OFF
ESCAPE
MOTOR ON/OFF/ESCAPE
Turns the motor ON or OFF. ESCAPE exits the
Options menu.
SET
SPEED
SET SPEED
Causes the DV-II+Pro to begin running at the
currently selected speed. This function works
only when the motor is ON. Also used to select
custom speeds when in the Custom Speed
option.
SELECT
DISPLAY
SELECT DISPLAY
Selects the data parameter to be displayed:
cP Viscosity (cP or mPa•s)
SS Shear Stress (dynes/cm
2
or Newtons/m
2
)
SR Shear Rate (1/sec)
ENTER
AUTO
RANGE
ENTER/AUTO RANGE
ENTER: Used to execute the currently ashing option.
AUTO RANGE: Presents the maximum (100% torque) viscosity attainable using the
selected spindle at the current viscometer spindle speed.
DV-II+ Pro
VISCOMETER
BROOKFIELD
PR INT
SE LECT
SP INDLE
SE LECT
DI SPLAY
SE T
SP EED
EN TER
AUTO
RA NGE
MOTOR
ON /OFF
ES CAPE
£
§
OP TIONS
TAB
ô
ö
Figure I-1
To Next Page
Loading...
Need help?
General
