Brookeld Engineering Labs., Inc. Page 11 Manual No. M/03-165-D0410
SELECT
SPINDLE
SELECT SPINDLE
Initiates spindle selection on the rst press and then selects the currently scrolled-to
spindle when pressed a second time.
PRINT
PRINT
Selects printing and non-printing modes when a printer is attached.
F
OPTION
TAB
OPTIONS/TAB
OPTIONS: Presents the Options menu, ashing the last escaped option.
TAB: Toggles between selectable items when indicated, as shown in
Figure I-2.
f
g
°F(FAHRENHEIT) $
f
g
CGS UNITS #
Note: Symbol indicating
the OPTIONS/TAB key
Figure I-2
Note: Inverted text (black background with white lettering) indicates that the
information is ashing on the viscometer display.
I.7 Cleaning
Be sure to remove the spindle from the instrument prior to cleaning. Severe instrument
damage may result if the spindle is cleaned in place.
Instrument and Keypad: Clean with a dry, non-abrasive cloth. Do not use solvents
or cleaners.
Immersed Components (spindles): Spindles are made of stainless steel. Clean with a non-
abrasive cloth and solvent appropriate for sample mate-
rial.
Note: When cleaning, take care not to apply excessive force - it may bend the
spindles.
To Next Page
Loading...
Need help?
General
