To Next Page

To Previous Page

Brookeld Engineering Labs., Inc. Page 8 Manual No. M/03-165-D0410

Temperature Accuracy: ±1°C | -100°C to +149°C

±2°C | +150°C to +300°C

Operating Environment: 0°C to 40°C temperature range (32°F to 104°F)

20% - 80%R.H.: non-condensing atmosphere

Ball Bearing Option:

If you ordered the ball bearing suspension system with your new instrument please

note the following:

1) The ball bearing suspension in your Brookeld instrument is noted on the serial tag

on the back of the head by the letter “B” after the mode.

2) When attaching and detaching the spindle, it is not necessary to lift the coupling

where the spindle connects to the instrument.

3) The Oscillation Check explained in the Appendix under Fault Diagnosis and

Troubleshooting does not pertain to this instrument.

Electrical Certications:

Conforms to CE Standards:

BSEN 61326: Electrical equipment for measurement, control and laboratory use -

EMC requirements

BSEN 61010-1: Safety requirements for electrical equipment, for measurement, control

and laboratory use

Notice to customers:

This symbol indicates that this product is to be recycled at an appropriate collection center.

Users within the European Union:

Please contact your dealer or the local authorities in charge of waste management on how to

dispose of this product properly. All Brookeld ofces and our network of representatives and

dealers can be found on our website: www.brookeldengineering.com

Users outside of the European Union:

Please dispose of this product according to your local laws.

I.4 Installation

Note: “IQ, OQ, PQ”, a guideline document for installation, operation and performance validation

for your DV-II+Pro digital viscometer can be downloaded from our web site www.

brookeldengineering.com.

1) Assemble the Model S Laboratory Stand (refer to assembly instructions in Appendix I).

Brookfield RVDV-II+Pro User Manual

Questions and Answers: