Brookeld Engineering Labs., Inc. Page 36 Manual No. M/03-165-D0410
to the default screen display and resumes normal viscometer operation with high speed output
enabled and normal printer operation using the last entered print time interval.
Note: For access to B.E.V.I.S. option, PC PROG must be OFF.
III.3.5 Download a Program
Please refer to Section IV for details on how to create a program before proceeding with this
section.
In the Options menu, scroll to the screen shown in Figure III-33:
D PC PROG OFF è
DOWNLOADAPROG ê
Figure III-33
Refer to Section IV for information on how to create B.E.V.I.S. programs on a PC which can
be downloaded to the DV-II+Pro Programmable Viscometer.
Press the ENTER/AUTORANGE key to download a B.E.V.I.S. program as shown in Figure III-34:
LOAD TO SLOT#1èê
PRESSENTERKEY
Figure III-34
Select a number from one (1) to four (4) using the UP/DOWN ARROW keys assign a storage
location for the program to be downloaded.
Note: Remember to keep track of what program is in what slot. If you elect to
download a new program to an active slot, you will overwrite the program
currently residing in that slot. The programs are saved automatically when the
viscometer is turned off.
After selecting the slot number, press the ENTER/AUTORANGE key and the screen shown in Figure
III-34 changes as follows: the top line ashes while the bottom line disappears. This ashing
screen will be displayed for as long as it takes to download the program. At the end of the
download, Figure III-35 is displayed:
DOWNLOAD DONE TO
EXIT PRESS A KEY
Figure III-35
If a PC is not attached, Figure III-36 will be displayed:
To Next Page
Loading...
