Brookeld Engineering Labs., Inc. Page 24 Manual No. M/03-165-D0410
On entry to the Options menu, the following rules regarding current viscometer operation are
in force:
1. Printer output will be suppressed when in the Custom Speed option, the Time to
Torque and Time to Stop options, the Download A Program and Run A Program
options. It will be continued when any other option is selected.
2. If the motor is ON when the user enters the Options menu, choices will be limited
to: CGS/SI units (under SETUP), °F/°C units (under SETUP), PRINTING
SELECTIONS and PC PROG.
3. The
last selected menu option will be ashing.
Selecting an Option
The following is a quick reference for entering and using the OPTIONS menu:
Press
OPTION
TAB
F
To enter Options Menu
Press
£
or
§
To scroll to a specic option
For Options:
Press
OPTION
TAB
F
To toggle between the choices available for a specic option when indicated
Press
ENTER
AUTO
RANGE
To select the ashing option
III.2 Setup
From the main Options screen, the user scrolls up or down until the following screen is
displayed:
SETUP è
DTIME TO TORQUE ê
Figure III-2
A press of the ENTER/AUTORANGE key takes you into the Setup sub-menu (Figure III-3). As in
the main Options menu, you can scroll up or down through the various Setup options. In order
to access all options, the motor must be turned off.
To Next Page
Loading...
Need help?
General
