Brookeld Engineering Labs., Inc. Page 5 Manual No. M/03-165-D0410
The equivalent units of measurement in the SI system are calculated using the following
conversions:
SI CGS
Viscosity: 1 mPa•s = 1 cP
Shear Stress: 1 Newton/m
2
= 10 dyne/cm
2
Torque: 1 Newton/m = 10
7
dyne/cm
References to viscosity throughout this manual are done in CGS units. The DV-II+Pro
Viscometer provides equivalent information in SI units.
I.1 Components
Please check to be sure that you have received all components, and that there is no damage. If
you are missing any parts, please notify Brookeld Engineering or your local Brookeld agent
immediately. Any shipping damage must be reported to the carrier.
Component Part Number Quantity
DV-II+Pro Viscometer varies 1
Model S Laboratory Stand MODEL S 1
Spindle Set with Case varies 1
LVDV-II+Pro set of four spindles SSL or
RVDV-II+Pro set of six spindles (#2 - #7) SSR or
HA/HBDV-II+Pro set of six spindles (#2 - #7) SSH
For Cone/Plate versions: a spindle wrench, one cone spindle and sample cup,
Part No. CPE-44Y replace the spindle set.
Power Cord 1
DVP-65 for 115 or DVP-65
DVP-66 for 230 DVP-66
RTD Temperature Probe DVP-94Y 1
Guard Leg: 1
LVDV-II+Pro B-20Y
RVDV-II+Pro B-21Y
Carrying Case DVE-7Y 1
DVLOADER CD ROM DVLOADER 1
Cable (DV-II+Pro to computer) DVP-80 1
Operating Manual M/03-165 1
To Next Page
Loading...
Need help?
General
