Brother BAS-342G Service Manual

2. FUNCTION SETTINGS
14
BAS-342G
Maintenance settings
No.
Setting
value
Setting item
Default
value
Run-in operation mode
0 Disabled
1
While the foot switch is being depressed, the work clamp moves up and down
once and then continuous operation starts. (No work clamp up/down movement
when memory switch No. 050=2 or 4)
2
While the foot switch is being depressed, the work clamp moves up and down
twice and then continuous operation starts. (No work clamp up/down movement
when memory switch No. 050=2 or 4)
750
3
While the foot switch is being depressed, the work clamp moves up and down
three times and then continuous operation starts. (No work clamp up/down
movement when memory switch No. 050=2 or 4)
0
Run-in operation cycle time adjustment timer
751
0 -
255 [Units x10 ms]
20
Sewing machine ID code
752 00 - 99
Sewing data specified on CF card
00
Reading/writing sewing data for old models
OFF Only compatible with floppy disks.
755
ON Reading and writing using CF cards is possible in data read/write mode.
OFF
Main shaft angle display mode
OFF Disabled
756
ON Main shaft angle is displayed when sewing machine starts.
OFF
Unique machine settings
No.
Setting
value
Setting item
Default
value
Automatic start for extended option output No. 1
OFF Disabled
950
ON Sewing machine starts when extended option output No. 1 is ON.
OFF
Program number output
OFF Disabled
951
ON
When the last two digits of the program number are 1 to 15, the program number
is output in 4 bits to extended option output 4 to 7.
OFF

Brother BAS-342G Specifications

General

Brand	Brother
Model	BAS-342G
Category	Sewing Machine
Language	English