Brother BAS-342G - 5-5. Installing the bobbin case

3. READING / WRITING DATA
23
BAS-342G
3. READING / WRITING DATA
3-1. Handling data
Program numbers (100 − 999) are read from CF cards.
Program numbers (0 − 99) are older BAS-300 series, BAS-300A series and BAS-300E/F series data and can be read from
floppy disks.
However, when memory switch No. 755 is set to ON, data for older series models (program numbers 0 − 99) can be
transferred from a floppy disk to a CF card using a computer and then be read from the CF card.
* In such cases, the effective reading mode will be [r 1].
Option
0 - 99
100 - 999
or
r9 mode
or
r1 mode
0 − 99 100 − 999
Old model series data range
(BAS***.SEW)
BAS-311G, BAS-326G, BAS-342G data range
ISM***.SEW
Sewing machine internal memory
Old model series data copied from floppy
disk to CF card
(0 − 99)
100 − 999
When memory switch
No. 755 = ON
r1 mode
or
r1 mode