Brother BAS-342G - Feed Mechanism

6. ASSEMBLY
BAS-342G
60
6-5. Feed mechanism
6-5-1. Y-feed mechanism
Apply the grease <SA8837-001> specified by Brother in the places indicated by .
(Continued on the next page)
1. Y-pulley brackets [2 pcs]
2. Y-GT belts [2 pcs]
3. Pulley fulcrum shafts [2 pcs]
4. Pulley fulcrum shaft collars [2 pcs]
5. Pulley A assemblies [2 pcs]
6. Set screws [4 pcs]
7. Y-pulley bracket assemblies [2 pcs]
8. Bolts with washers [4 pcs]
(Temporarily tighten)
1278B
1279B