2-29
Confidential
No Tray T3 Reinstall Tray 3. When printing from paper tray 3 to
5, the T3(LT or TT) paper feed
sensor detected open paper tray 3
(before registering printing data to
engine).
8503 2-63
When printing from paper tray 3 to
5, the T3(LT or TT) paper feed
sensor detected open paper tray 3
(after registering printing data to
engine).
8507 2-64
No Tray T4 Reinstall Tray 4. When printing from paper tray 4 to
5, the T4(LT or TT) paper feed
sensor detected open paper tray 4
(before registering printing data to
engine).
8504 2-63
When printing from paper tray 4 to
5, the T4(LT or TT) paper feed
sensor detected open paper tray 4
(after registering printing data to
engine).
8508 2-64
Out of Memory Press Stop[x]. There is insufficient memory to
expand PC print data.
C700 2-79
Output Tray Full Remove the paper
from the Standard
Output Tray.
Machine stack sensor detected
the eject paper full state at the
start of printing when the machine
output tray was selected as the
output tray.
8702 2-64
Paper Low Paper Low T1 Tray1 paper level is low. --- 4.14.4
Paper Low T2 Tray2 paper level is low. --- 4.14.4
Paper Low T3 Tray3 paper level is low. --- 4.14.4
Paper Low T4 Tray4 paper level is low. --- 4.14.4
Paper Low T5 Tray5 paper level is low. --- 4.14.4
Print Data Full Print Data is full.
Press Stop[x] Key and
delete the previously
stored data.
The memory size allotted for
Secure Print was exceeded when
saving Secure Print data.
C800 2-79
Print Unable ZC Turn the power off and
then back on again.
Detected irregular power supply
for less than 100 times.
6F00 2-50
Print Unable ** Turn the power off and
then back on again.
Printing related error. Refer to
error code “**”.
--- ---
Error message
Description
Error
codes
Refer
to:
First line Second line
To Next Page
Loading...
Need help?
General
Weight and Dimensions
