EasyManuals Logo

Brother DCP-L5600DN Service Manual

Brother DCP-L5600DN
408 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #68 background imageLoading...
Page #68 background image
2-33
Confidential
Unusable Device Remove the Device.
Turn the power off and
back on again.
A USB device not within the
specification is connected to the
USB terminal, resulting in over
current.
EC00 2-81
-
The connected USB device is not
supported.
--- 4.14.3
USB Device Error Only insert one USB
device at a time.
When the power switch was ON,
multiple USB flash memories are
connected to the USB host.
--- 4.14.3
Wrong Paper
Size T1
Reload correct paper
in Tray 1
or press [Retry].
When printing from the paper tray 1,
the size of paper set in the paper
tray 1 does not match the size
specified by the driver.
--- 4.14.1
Wrong Paper
Size T2
Reload correct paper
in Tray 2
or press [Retry].
When printing from the paper tray 2,
the size of paper set in the paper
tray 2 does not match the size
specified by the driver.
--- 4.14.1
Wrong Paper
Size T3
Reload correct paper
in Tray 3
or press [Retry].
When printing from the paper tray 3,
the size of paper set in the paper
tray 3 does not match the size
specified by the driver.
--- 4.14.1
Wrong Paper
Size T4
Reload correct paper
in Tray 4
or press [Retry].
When printing from the paper tray 4,
the size of paper set in the paper
tray 4 does not match the size
specified by the driver.
--- 4.14.1
Wrong Paper
Size T5
Reload correct paper
in Tray 5
or press [Retry].
When printing from the paper tray 5,
the size of paper set in the paper
tray 5 does not match the size
specified by the driver.
--- 4.14.1
Wrong Paper
Size MP
Reload correct paper
in MP Tray
or press [Retry].
When printing from the MP tray,
the size of paper set in the MP tray
does not match the size specified
by the driver.
--- 4.14.1
2-sided Disabled Close the Back Cover
and put the 2-sided
Tray back in.
The back cover/duplex tray sensor
detected that the cover was open
when duplex printing is started.
(Before registering printing data to
engine)
8903 2-65
The back cover/duplex tray sensor
detected that the cover was open
during duplex printing. (After
registering printing data to engine)
8904 2-65
Error message
Description
Error
codes
Refer
to:
First line Second line

Table of Contents

Other manuals for Brother DCP-L5600DN

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother DCP-L5600DN and is the answer not in the manual?

Brother DCP-L5600DN Specifications

General IconGeneral
Typeall in one
Colorblack/gray, multi
Touch Screenyes
Display Size3.7 inches
Tray Capacity50
Output Tray Capacity150 sheets
Automatic Document Feeder Capacity70 sheets
Paper Sizeansi a, legal, executive, a4, a5, a6, folio
Paper Handlingletter, legal, executive, a4, a5, a6, envelopes, custom sizes (3.0-8.5" (w), 5.0-14" (l))
Paper Weight60 grams per square meter
Printing Methodmonochromatic
Color Print Speed0 pages per minute
Mono Print Speed42 pages per minute
First Page Print Time7 seconds
Print Resolution Monoup to 1200 x 1200
Two-Sided Printingyes
Maximum Number of Pages Per Monthup to 50, 000
Reduction and Enlargementno
Photo Printingno
Scanner Typeflatbed
Scan Resolutionup to 1200 x 1200
Duplex Scanyes
Max Copies99
Copier Resolution Monoup to 1200 x 600
Fax Functionno
Cartridgesbrother tn820, brother tn850
Number Of Cartridges1
Internal Memoryyes
Memory Cardno
Networkwired
Connectivityusb 2.0, ethernet
Mobile Devices Connectionno
Weight and Dimensions IconWeight and Dimensions
Depth16.8 inches
Height16.8 inches
Width19.5 inches
Net Weight37.7 pounds

Related product manuals