Brother GTX-4 - Page 129

4-32
Improvement of print quality
X0204
Cleaning conditions
Pre-cleaning state Post-cleaning state
(4) After the cleaning is completed, close the front cover.
(5) Turn on the power.
<NOTE>
 Dispose of any waste resulting from the cleaning in accordance with applicable laws and ordinances.
<TIPS>
 Then, the head cleaning will be performed to prevent any ink from drying up.
 Because the cleaning cup will be reused, rinse it in clean cleaning solution and store it in a safe place.
(6) Print out a nozzle check pattern to check the result.
 If non-ink ejection nozzle is not found -> OK
 If the state of non-ink ejection nozzle is not changed -> NG
=> "(6) Is maintenance operation (suction, exhaust) normal?"