Brother GTX-4 - Default Chapter; Disassembling; When You Dispose of the Machine

2
When you dispose of the machine

Required Tools
Phillips screwdriver: M3 to M5
Disassembling
(1) Remove the Cover PANEL SIDE.
(2) Remove the Lithium Battery (1) by pulling out the holder in the direction of the arrow.
(3) Pickup the Lithium Battery (1) to the direction of the arrow.
(1)
(1)
(1)
Note based on California law (USA) on the use and handling of Perchlorate
This product contains a CR Coin Lithium Battery which contains Perchlorate Material – special handling may
apply.
See http://www.dtsc.ca/gov/hazardouswaste.perchlorate.