Brother GTX-4 - Replacement of AC Inlet

6-156
Disassembly / Replacement / Adjustment
6-2-9. Replacement of AC inlet
In the case that the power is turned on, press the power switch to turn off the power.
Unplug the power cord from the main unit and start the work after five or more minutes have passed.
Disassembly
(1) Remove the two screws fixing the cartridge cover located at the bottom of the right side of the main unit.
(2) Loosen the two screws fixing the cartridge cover located inside the cover UR.
(3) Lift up the portion marked below of the cartridge cover to detach it.
(4) Remove the two screws fixing the cord cover to detach it.
4
Cord cover
1
Cartridge cover
Cover UR
2