Brother GTX-4 - Replacement of Platen Motor

6-18
Disassembly / Replacement / Adjustment
6-1-6. Replacement of platen motor
Disassembly
(1) Remove covers upon reference to "6-1-3. Disassembly / Assembly of platen".
(2) Loosen the two hole bolts and relax the tension applied to the deceleration belt using the belt tension adjustment
hole bolt.
(3) Detach deceleration belt from the pulley.
(4) Remove connector (one) from platen motor.
(5) Remove the four hole bolts fixing the platen motor and detach motor.
2
5
2
5
Connector
2
Deceleration belt
Pulley
Belt tension adjustment hole bolt