6-152
Disassembly / Replacement / Adjustment
6-2-7. Replacement of power unit
Described here is about the procedures to replace only the power unit within the power circuit board plate assy.
In the case that the power is turned on, press the power switch to turn off the power.
Unplug the power cord from the main unit and start the work after five or more minutes have passed.
Disassembly
(1) Remove the two screws fixing the cover power unit to detach it.
(2) Disconnect all the three connectors connected to the power unit.
(3) Remove the four screws fixing the power unit to detach it.
3
2
1
To Next Page
Loading...
