6-30
Disassembly / Replacement / Adjustment
6-1-12. Replacement of carriage belt
In the case that the power is turned on, press the power switch to turn off the power.
Disassembly
(1) Remove the two screws of the panel-side cover and slide the cover in the arrow direction to detach it.
(2) Disconnect carriage motor harnesses connected to the main circuit board.
(3) Remove the two screws fixing the cover PB and detach the cover PB while lifting it.
(4) Detach the mist fan filter located on either side of the cover UB.
4
3
1
Panel-side cover
2
To Next Page
Loading...
