Brother GTX-4 - Replacement of Felt Within Cartridge Base

6-121
Disassembly / Replacement / Adjustment
6-1-33. Replacement of felt within cartridge base
<CAUTION>
 If there is any ink clot, it is possible that the felt is broken when in replacement and the broken felt remains in the device. Remove
the ink clot before performing the work.
Disassembly
(1) Remove the four screws fixing the cartridge cover B on the right rear of the main unit to detach it.
(2) Pull out the felts.
2
Cartridge cover B
1
1