Brother GTX-4 - Replacement of Pump Assy

6-63
Disassembly / Replacement / Adjustment
6-1-21. Replacement of pump assy
Disassembly
(1) With reference to "6-1-18. Replacement of maintenance unit", detach it from the main unit.
(2) Remove the six screws fixing the maintenance bottom plate to reverse the plate upside down.
(3) With reference to "6-2-25. Replacement of maintenance motor", detach all the six motors with the motor plates
attached.
(4) Detach the tube from the clamp.
(5) Detach the waste ink tube from the waste ink tube bracket.
4
5
2
3