Brother GTX-4 - 7-1-6. Replacing the Fan Filter

6-5
Disassembly / Replacement / Adjustment
(7) Remove the two screws fixing the cartridge cover located at the bottom of the right side of the main unit.
(8) Remove the two screws fixing the cartridge cover located inside the cover UR.
(9) Lift up the portion marked below of the cartridge cover to detach it.
(10) Remove the screw (one) and two hole bolts fixing the cover UR and detach cover upon lifting its rear portion.
10
Cover UR
10
7
Cartridge cover
Cover UR
8