Brother GTX-4 - 7-2. Tasks to Be Performed When Needed; 7-2-1. Print Out of the Nozzle Check Pattern (Checking on the Print Heads)

6-7
Disassembly / Replacement / Adjustment
(13) Remove the four screws on either side of the cover PF.
(14) Loosen the two screws fixing the rear side of the cover PF to pull out cover.
(15) Remove the four screws on either side of the cover PC and detach cover.
(16) Remove the five screws fixing the cover DL to detach cover.
16
15
15
Cover PC
14
13
13
Cover PF
Cover PF