Brother GTX-4 - 7-2-2. Head Cleaning

6-9
Disassembly / Replacement / Adjustment
Assembly
(1) To perform the assembly, take the reverse procedures to disassembly operation.
<TIPS>
 When assembling cover UB, main unit top cover, cover UR and cover UL, be sure to conduct the final tightening after
adjusting the gaps between covers upon preliminary assembly.
(2) Install the cover DBR.
<CAUTION>
 Take care to prevent the cover DBR from interfering with the tube.
(3) When assembling cover UL, be sure to fit the ribs on the cover into the cutouts located on the main unit.
<IMPORTANT>
 Always assemble cover UL first, then attach cover L.
(4) When assembling cover UR, be sure to fit the ribs on the cover into the cutouts located on the main unit.
(5) Attach cover UB.
<CAUTION>
 Be sure not to buckle the two backstops located on the cover UB.
Cover UR
Cover UL
Cover DBR